p型未掺杂富锌ZnO薄膜的形成和性能研究

以高纯ZnO为靶材,氩气为溅射气体,利用射频磁控溅射技术在石英衬底上生长出纤锌矿结构的富锌ZnO薄膜.薄膜沿(002)择优取向生长,厚约为1.2μm,呈现电绝缘特性.将溅射的ZnO薄膜在10-3Pa,510~1 000 K的温度范围等温退火1 h,室温Hall测量结果表明ZnO薄膜的导电性能经历了由绝缘—n型—p型—n型半导体的变化.XPS测试表明ZnO薄膜的Zn/O离子比随退火温度的升高而降低,但一直是富锌ZnO,说明未掺杂的富锌ZnO也可以形成p型导电.p型未掺杂富锌ZnO薄膜的形成可归因于VZn受主浓度可以克服VO和Zni本征施主的补偿效应.     

纳米晶复合Pr2Fe14B/α-Fe永磁材料磁性的研究

采用熔体快淬的方法制备Pr₂Fe₁₄B/α-Fe纳米晶复合永磁材料.使用振动样品磁强计(VSM)测量样品的室温磁性能.实验合金成分为(Pr_xFe_94.3-xB_5.7)_0.99Zr₁(其中x＝8.2，8.6，9.0，9.4，9.8，10.2，10.6，11.0，11.4(原子分数，%)).系统地研究了辊速及合金成分对快淬带磁性能的影响，当Pr原子分数由8. 关键词： 纳米复合永磁材料 熔体快淬 2Fe₁₄B/α-Fe')" href="#">Pr₂Fe₁₄B/α-Fe 磁性     

Colliding stacks: A large deviations analysis

We analyze the performance of a prototypical scheme for shared storage allocation: two initially empty stacks evolving in a contiguous block of memory of size m. We treat the case in which the stacks are more likely to shrink than grow, but with the probabilities of insertion and deletion allowed to depend arbitrarily on stack height as a fraction of m. New results are obtained on the m → ∞ asymptotics of the stack collision time, and of the final stack heights. The results of Wentzell and Freidlin on the large deviations of Markov chains are used, and the relation of their formalism to the Hamiltonian formulation of classical mechanics is emphasized. Certain results on higher-order asymptotics follow from WKB expansions.     

Viscometric properties of dilute polystyrene/dioctyl phthalate solutions

We report viscometric data collected in a Couette rheometry on dilute, single‐solvent polystyrene (PS)/dioctyl phthalate (DOP) solutions over a variety of polymer molecular weights (5.5 × 10⁵ ≤ M_w ≤ 3.0 × 10⁶ Da) and system temperatures (288 K ≤ T ≤ 318 K). In view of the essential viscometric features, the current data may be classified into three categories: The first concerns all the investigated solutions at low shear rates, where the solution properties are found to agree excellently with the Zimm model predictions. The second includes all sample solutions, except for high‐molecular‐weight PS samples (M_w ≥ 2.0 × 10⁶ Da), where excellent time–temperature superposition is observed for the steady‐state polymer viscosity at constant polymer molecular weights. No similar superposition applies at a constant temperature but varied polymer molecular weights, however. The third appears to be characteristic of dilute high‐molecular‐weight polymer solutions, for which the effects of temperature on the viscosity curve are further complicated at high shear rates. The implications concerning the relative importance of hydrodynamic interactions, segmental interactions, and chain extensibility with increasing polymer molecular weight, system temperature, and shear rate are discussed. © 2006 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 44: 787–794, 2006     

动态柱形空穴膨胀模型及其在侵彻问题中的应用

 在侵彻问题中的应用进行了研究。通过采用相似变换求解塑性区控制方程，获得了动态柱形空穴膨胀中的弹塑性界面速度、径向应力分布、空穴表面应力的解。基于柱形空穴模型，推导了侵彻方程，并将其得到的预测结果与侵彻实验数据进行了比较。结果表明，模型的理论解与现有数据吻合得很好。 结果还显示了材料的可压缩性和塑性强化模量对柱形空穴膨胀以及侵彻阻力的影响。     

Shadowing and Inverse Shadowing for C^1 Endomorphisms

In this paper, we consider the shadowing and the inverse shadowing properties for C^1 endomorphisms. We show that near a hyperbolic set a C^1 endomorphism has the shadowing property, and a hyperbolic endomorphism has the inverse shadowing property with respect to a class of continuous methods. Moreover, each of these shadowing properties is also ＂uniform＂ with respect to C^1 perturbation.     

椭圆波导FEM放大器的非线性特性研究

 以椭圆波导、平板摇摆器为FEM放大器的模型，导出了自洽的注波互作用三维非线性方程组。在此基础上编制了相应的程序。利用该程序分析了FEM放大器的饱和功率、效率以及带宽等高频特性。考虑了摇摆器渐变、空间电荷波、电子初始速度零散对高频特性的影响。     

自控液晶光阀组式光刻快门研究

通过理论推导，构建了抗蚀剂的感光特性、光源的光效与曝光量之间的数学模型，为液晶光阀代替穿孔带提供了理论依据.结合液晶光阀的工作原理和光刻快门的控制原理，对液晶光阀组的控制进行了研究并给出了其控制电路图.通过实际光刻试验，自控液晶光阀组光刻快门机构可以完成编码图案的控制，通光控制达到了预计要求，刻出的图案清晰，线条陡直.证明液晶光阀组替代穿孔带用作光刻快门是完全可行的.     

考虑材料熔化潜热的高温高压本构

本文在修正的SCG模型基础上，提出了一种考虑了熔化潜热的高温高压本构.该本构所给出的铝的剪切模量的变化分为三个阶段：加工硬化，温度软化和熔化，并在完全熔化点处变为零.并且在前两个阶段，计算的结果与修正的SCG模型所给出的剪切模量的差别不超过4%，这一差别是在动高压实验误差范围之内的，在熔化区所给出的剪切模量与现有的实验数据相符合. 关键词： 剪切模量 熔化潜热 修正的SCG模型 动高压实验     

An inverse radiative transfer problem of simultaneously estimating profiles of temperature and radiative parameters from boundary intensity and temperature measurements

A parallel-plane space filled with absorbing, emitting, isotropically scattering, gray medium is studied in this paper. The boundary intensity and boundary temperature profiles are calculated for the inverse analysis. For the simultaneous estimation of temperature, absorption and scattering coefficient profiles in the medium, the sum of residuals of boundary intensity and temperature after being weighted by a balance factor is minimized through using a Newton-type iteration algorithm and the least-squares method. To avoid over-updating for the parameters, the relative updating magnitude during the iteration process is constrained not to be >0.5. It is shown that the boundary intensity measurement alone is not enough to estimate simultaneously the temperature (source) and the radiative properties (both absorption and scattering coefficients) when the measurement data contain sensitive random errors. The boundary temperature measurement can serve as a necessary supplementation to the boundary intensity to make this kind of inverse radiative transfer problem resolvable. It was shown that a compensation relationship between absorption and scattering coefficients makes it difficult to fix them accurately. Parabolic profiles for the three parameters are used to validate the estimation method. When the optical thickness approaches 4.0, the results for the radiative properties are not acceptable, although the result for temperature profile is reasonable. This means the method needs further improvements.